Jaguar 2000-06

Accessory Drive Belts

Print

Inspection



Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.

Removal & Installation



4.0L And 4.2L Engines
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the air cleaner outlet pipe.

    Click image to see an enlarged view

    Fig. Rotating supercharger belt tensioner

  6.  
  7. If equipped with a Supercharger, perform the following:

    Use a 1/2 inch square drive bar to rotate the supercharger belt tensioner
     
    Detach the supercharger belt
     
    Raise and support the vehicle.
     
    Remove the air deflector
     
    Loosen the supercharger belt tensioner retaining bolt.
     
    Reposition the supercharger belt tensioner.
     
    Lower the vehicle. Remove the supercharger belt.
     
    To install, reverse removal procedure. Tighten belt tensioner to: 30 ft. lbs. (40 Nm).

    Click image to see an enlarged view

    Fig. Rotating accessory drive belt tensioner (1) and identifying belt (2)-Without Supercharger



    Click image to see an enlarged view

    Fig. Remove the accessory drive belt tensioner retaining bolt (1), accessory drive belt tensioner (2) and accessory drive belt (3)

     

  8.  
  9. For all other vehicles, perform the following:

    Rotate the accessory drive belt tensioner counter-clockwise. Use a 3/8 inch square drive bar to rotate the accessory drive belt tensioner.
     
    Detach the accessory drive belt.
     
    Remove the accessory drive belt tensioner retaining bolt.
     
    Remove the accessory drive belt tensioner.
     
    Remove the accessory drive belt.
     
    To install, reverse removal procedure. Tighten belt tensioner to: 30 ft. lbs. (40 Nm).
     

  10.  

2.5 And 3.0L Engines


Click image to see an enlarged view

Fig. Identifying drivebelt tensioner clip



Click image to see an enlarged view

Fig. Rotating belt tensioner (1) and removing belt (2)

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove and discard the drivebelt tensioner clip (if equipped).
  6.  
  7. Rotate the belt tensioner counter-clockwise. Use a 3/8 inch square drive bar to rotate the belt tensioner.
  8.  
  9. Remove the belt.
  10.  
  11. To install, reverse removal procedure.
  12.  

Adjustment



Vehicles are equipped with an auto drive belt tensioner. No adjustment is possible or necessary.

Drive Belt Routings





Click image to see an enlarged view

Fig. Accessory drive belt routing-XJ Range and XK Range with 4.0L engine



Click image to see an enlarged view

Fig. Accessory drive belt routing-X-Type with 2.5L and 3.0L engines



Click image to see an enlarged view

Fig. Accessory drive belt routing-S-Type with 3.0L engine



Click image to see an enlarged view

Fig. Accessory drive belt routing-S-Type with 4.0L engine



Click image to see an enlarged view

Fig. Accessory drive belt routing-S-Type, XJ Range and XK Range with 4.2L engine



Click image to see an enlarged view

Fig. Supercharger belt routing



Click image to see an enlarged view

Fig. Accessory drive belt routing-XJ Range and XK Range with 4.0L engine



Click image to see an enlarged view

Fig. Accessory drive belt routing-X-Type with 2.5L and 3.0L engines



Click image to see an enlarged view

Fig. Accessory drive belt routing-S-Type with 3.0L engine



Click image to see an enlarged view

Fig. Accessory drive belt routing-S-Type with 4.0L engine



Click image to see an enlarged view

Fig. Accessory drive belt routing-S-Type, XJ Range and XK Range with 4.2L engine



Click image to see an enlarged view

Fig. Supercharger belt routing

 
label.common.footer.alt.autozoneLogo