Jaguar 2000-06

Ignition Lock Cylinder

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Vehicles with ignition switch lock cylinder interlock cable, remove the transmission selector lever.
  4.  
  5. Detach the ignition switch lock cylinder interlock cable.
  6.  
  7. All vehicles, remove the instrument panel lower trim.
  8.  
  9. Detach the steering column lower shroud.
  10.  
  11. Remove the steering column lower shroud.
    CAUTION
    If excessive force is used to remove the ignition switch lock cylinder shroud damage may occur to the instrument panel.

  12.  
  13. Remove the ignition switch lock cylinder shroud.
  14.  
  15. Detach the ignition switch lock cylinder housing.
  16.  
  17. Disconnect the electrical connector.
    CAUTION
    Make sure the ignition switch lock cylinder interlock cable is not crimped.

  18.  
  19. Vehicles with ignition switch lock cylinder interlock cable, Remove the ignition switch lock cylinder housing and disconnect the electrical connector.
  20.  
  21. All vehicles, Remove the ignition switch lock cylinder housing and disconnect the electrical connector.
  22.  
  23. Turn ignition key to position one. Release the retaining tang. Remove the ignition switch lock cylinder.
  24.  
  25. To install, reverse removal procedure.
  26.  

 
label.common.footer.alt.autozoneLogo