Jaguar 2000-06

Transmission Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Install a support fixture to the engine lifting eyes.
  4.  
  5. Drain the transmission fluid.
  6.  
  7. Remove or disconnect the following:

    Negative battery cable
     
    Engine/transaxle assembly
     
    Transfer case
     
    Transfer case link shaft
     
    Transaxle dust cover
     
    Transaxle
     

  8.  

To install:

  1. Install or connect the following:

    Transmission to the engine. Tighten the bolts to 35 ft. lbs. (48 Nm).
     
    Transfer case. Tighten the bolts to 66 ft. lbs. (90 Nm). Tighten the nuts to 18 ft. lbs. (25 Nm).
     
    Engine/transaxle assembly
     
    Negative battery cable
     

  2.  
  3. Fill the transmission to the correct level with the proper fluid. Do not over-fill.
  4.  
  5. Bleed the clutch system.
  6.  
  7. Start the engine and check for leaks.
  8.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Install a support fixture to the engine lifting eyes.
  4.  
  5. Drain the transmission fluid.
  6.  
  7. Remove or disconnect the following:

    Negative battery cable
     
    Engine/transaxle assembly
     
    Transfer case
     
    Transfer case link shaft
     
    Transaxle dust cover
     
    Transaxle
     

  8.  

To install:

  1. Install or connect the following:

    Transmission to the engine. Tighten the bolts to 35 ft. lbs. (48 Nm).
     
    Transfer case. Tighten the bolts to 66 ft. lbs. (90 Nm). Tighten the nuts to 18 ft. lbs. (25 Nm).
     
    Engine/transaxle assembly
     
    Negative battery cable
     

  2.  
  3. Fill the transmission to the correct level with the proper fluid. Do not over-fill.
  4.  
  5. Bleed the clutch system.
  6.  
  7. Start the engine and check for leaks.
  8.  

 
label.common.footer.alt.autozoneLogo