Jaguar 2000-06

Parking Brake Shoes

Print

Removal & Installation



  1. Carry out the parking brake cable tension release.
  2.  
  3. Remove both rear wheels and tires.
  4.  
  5. Detach the parking brake cable.
  6.  
  7. Remove the parking brake pad retaining pins.
  8.  
  9. Remove the parking brake pad anti-rattle spring plate.
  10.  
  11. Remove the parking brake pads.
  12.  
  13. Remove the parking brake caliper.
  14.  
  15. Discard the parking brake caliper retaining bolts.
    NOTE
    Make sure the brake disc faces are clean before installation.


    NOTE
    Brake pads must always be replaced in axle sets.


    NOTE
    Install new parking brake caliper retaining bolts.

  16.  
  17. To install, reverse removal procedure. Tighten parking brake caliper retaining bolts to: 51 ft. lbs. (70 Nm).
  18.  

 
label.common.footer.alt.autozoneLogo