Jaguar 2000-06

Bleeding

Print

When filling the reservoir, make sure that the fluid is clean and not agitated prior to use. The fluid should be poured slowly into the reservoir to minimize the possibility of aeration.

  1. Fill the reservoir to the MAX mark.
    NOTE
    Do not start the engine.

  2.  
  3. Turn the steering from lock to lock.
  4.  
  5. Check the fluid level. Fill the reservoir to the MAX mark if necessary.
  6.  
  7. Start the engine and turn the steering from lock to lock.
  8.  
  9. Switch the engine off.
  10.  
  11. Check the fluid level. Fill the reservoir to the MAX mark if necessary.
  12.  
  13. Start the engine, turn the steering wheel from lock to lock. If excessive noise is apparent or shudder is evident through the steering wheel, repeat the bleed procedure.
  14.  

 
label.common.footer.alt.autozoneLogo