Jaguar 2000-06

CV-Joints

Print

Overhaul



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:
    NOTE
    Do not disassemble the spider and rollers.



    Axle halfshaft
     
    Inner boot clamps and push the boot back
     
    CV-joint housing
     
    Snapring
     
    Spider and rollers
     
    CV-joint boot
     

  4.  

To install:

  1. Install or connect the following:

    CV-joint boot
     
    Spider and rollers
     
    Snapring
     

  2.  
  3. Apply clean grease to the CV-joint housing and the boot.
  4.  
  5. Install or connect the following:

    CV-joint housing and tighten the boot clamps
     
    Axle to the vehicle
     

  6.  

 
label.common.footer.alt.autozoneLogo