Jaguar 2000-06

Coil Springs

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the rear wheels.
  4.  
  5. Using a suitable jack, support the rear lower arm.
  6.  
  7. Remove or disconnect the following:

    Rear wheels
     
    Stabilizer bar link
     
    Rear lower arm
     
    Jack
     
    Lower arm from subframe
     
    Spring
     
    Isolator

    Click image to see an enlarged view

    Fig. Rear suspension assembly-S-Type

     

  8.  

To install:

  1. Install or connect the following:

    Isolator
     
    Spring
     
    Lower arm: Tighten bolt to 85 ft. lbs. (115 Nm).
     
    Stabilizer bar link: Tighten bolt to 26 ft. lbs. (35 Nm).
     
    Rear wheels
     

  2.  
  3. Check rear wheel alignment and adjust as necessary.
  4.  

For all except the X-Type, the rear coil spring is serviced with the strut assembly.

 
label.common.footer.alt.autozoneLogo