Jeep CJ 1945-1970 Repair Information

Chassis Greasing

Print

See Figures 1 through 7

Chassis greasing should be performed every 6 months or 7,500 miles (12,000 km) for Jeeps used in normal or light service. More frequent greasing is recommended for Jeeps in heavy or severe usage: every 3 months or 3,000 miles (4,800 km). Greasing can be performed with a commercial pressurized grease gun or at home by using a hand-operated grease gun. Wipe the grease fittings clean before greasing in order to prevent the possibility of forcing any dirt into the component.

Water resistant EP chassis lubricant (grease) should be used for all chassis grease points. Refer to the accompanying illustrations for the locations of the vehicles' grease points.



Click image to see an enlarged view

Fig. Fig. 1: A hand-operated grease gun can be used to grease the components on your Jeep



Click image to see an enlarged view

Fig. Fig. 2: DJ series chassis lubrication points



Click image to see an enlarged view

Fig. Fig. 3: CJ-2A and CJ-3A chassis lubrication points



Click image to see an enlarged view

Fig. Fig. 4: CJ-3B, CJ-5 and CJ-6 chassis lubrication points



Click image to see an enlarged view

Fig. Fig. 5: 4-cylinder, 2WD Utility series chassis lubrication points



Click image to see an enlarged view

Fig. Fig. 6: 4-cylinder, 4WD Utility series chassis lubrication points



Click image to see an enlarged view

Fig. Fig. 7: 6-cylinder, 2WD Utility series chassis lubrication points

 
label.common.footer.alt.autozoneLogo