Jeep CJ 1945-1970 Repair Information

Ignition Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the battery ground cable.
  2.  
  3. Unscrew the nut from the front of the instrument panel and remove the switch. Some early production Utility models had a switch held in place by a bezel and tension spring, rather than a threaded bezel.
  4.  
  5. Lower the switch and detach the wiring.
  6.  
  7. Reverse the procedure for installation.
  8.  

 
label.common.footer.alt.autozoneLogo