Jeep CJ 1945-1970 Repair Information

Seats

Print

REMOVAL & INSTALLATION



Front and Rear

See Figures 1, 2, 3 and 4

  1. Unbolt the seat frame from the floor pan.
  2.  
  3. Remove the seat.
  4.  
  5. Installation is the reverse of removal. Tighten the bolts to 15 ft. lbs. (20 Nm).
  6.  

The seat pivot bolts on Utility models may work loose unless they are properly installed. Proper installation is with the bolt head next to the seat leg, not the pivot bracket. The flat washer should be next to the seat leg.

Click image to see an enlarged view

Fig. Fig. 1: Common front seat mounting for Jeep Utility models



Click image to see an enlarged view

Fig. Fig. 2: Common mounting for rear seats used on CJ models



Click image to see an enlarged view

Fig. Fig. 3: Typical mounting for bucket seats used in late CJ-5 and CJ-6 models



Click image to see an enlarged view

Fig. Fig. 4: Front seat mounting for the optional 1/3-2/3 style seats in late CJ-5 and CJ-6 models

 
label.common.footer.alt.autozoneLogo