Jeep CJ/Scrambler 1971-1986 Repair Guide

Servo

Print

See Figures 1 and 2

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1: The cruise control servo is mounted on the firewall, under the hood



Click image to see an enlarged view

Fig. Fig. 2: Use care when routing the speedometer cable near the control arm

The servo is mounted on a bracket in the engine compartment

  1. Remove the locknut holding the servo to the bracket.
  2.  
  3. Remove the 2 vacuum hoses from the servo.
  4.  
  5. Unplug the electrical connector.
  6.  
  7. Remove the 2 nuts and cable housing from the servo.
  8.  
  9. Release the cable clip.
  10.  
  11. Installation is the reverse of removal. Tighten the locknut to 60 inch lbs.
  12.  

 
label.common.footer.alt.autozoneLogo