Jeep CJ/Scrambler 1971-1986 Repair Guide

Fog Lights

Print

AIMING



  1. Park the Jeep on level ground, facing, perpendicular to, and about 25 ft. from a flat wall.
  2.  
  3. Remove any stone shields and switch on the fog lights.
  4.  
  5. Loosen the mounting hardware of the lights so you can aim them as follows:
    1. The horizontal distance between the light beams on the wall should be the same as between the lights themselves.
    2.  
    3. The vertical height of the light beams above the ground should be 4 inches less than the distance between the ground and the center of the lamp lenses.
    4.  

  6.  
  7. Tighten the mounting hardware.
  8.  

 
label.common.footer.alt.autozoneLogo