Jeep CJ/Scrambler 1971-1986 Repair Guide

Wiper Blades and Arms

Print

See Figure 1

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1: When installing the wiper arm, just snap it onto the pivot. Make sure that it doesn't hit the molding while running

  1. Pull the blade away from the windshield.
  2.  
  3. Push against the tip of the wiper arm to compress the locking spring and disengage the retaining pin.
  4.  
  5. Pivot the blade clockwise to unhook it from the arm.
  6.  
  7. To install the blade, just snap it into position.
  8.  
  9. To remove the arm, simply pry it straight off carefully. When you reinstall it, make sure that it doesn't hit the rubber molding at either edge of the windshield while running.
  10.  

 
label.common.footer.alt.autozoneLogo