Jeep Wagoneer/Commando/Cherokee 1957-1983 Repair Information

Clutch Slave Cylinder

Print

REMOVAL & INSTALLATION 1962-65 Wagoneer & J-Series Truck



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Cross-sectional view of the clutch slave cylinder components 1962-65 models

  1. Raise and support the truck on jackstands.
  2.  
  3. Disconnect the hydraulic line at the cylinder. Cap the line.
  4.  
  5. Unbolt and remove the slave cylinder from the clutch housing.
  6.  
  7. Installation is the reverse of removal. Torque the mounting bolts to 16 ft. lb. Refill and bleed the system.
  8.  

 
label.common.footer.alt.autozoneLogo