Jeep Wagoneer/Commando/Cherokee 1957-1983 Repair Information

Power Seat Motor

Print

REMOVAL & INSTALLATION



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Common power seat assembly

  1. Disconnect the battery ground.
  2.  
  3. Remove the bolts holding the seat assembly to the floor pan.
  4.  
  5. Tilt the seat and disconnect the wiring harness.
  6.  
  7. Remove the seat assembly.
  8.  
  9. Invert the seat on a clean surface.
  10.  
  11. Remove the attaching bolts and lift out the seat motor. Disconnect the wiring and cables.
  12.  
  13. Installation is the reverse of removal.
  14.  

If the seat transmission fails, it is not replaceable. The entire seat adjuster assembly will have to be replaced.

 
label.common.footer.alt.autozoneLogo