Jeep Wagoneer/Commando/Cherokee 1957-1983 Repair Information

Fuel Pump

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable. Remove all necessary components in order to gain access to the fuel tank sending unit.
  2.  
  3. Drain the fuel from the fuel tank. Raise and support the vehicle safely.
  4.  
  5. Remove the fuel inlet and outlet hoses from the sending unit. Remove the sending unit wires.
  6.  
  7. Remove the sending unit retaining lock ring. Remove the sending unit, which incorporates the electric fuel pump, along with the O-ring seal from the fuel tank.
  8.  
  9. Installation is the reverse of removal. Be sure to use a new O-ring seal.
  10.  

 
label.common.footer.alt.autozoneLogo