Jeep Wagoneer/Commando/Cherokee 1957-1983 Repair Information

Throttle Position Sensor (T.P.S.)

Print

REMOVAL & INSTALLATION



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the throttle position sensor mounting and retainers

  1. Remove the upper and lower air cleaner assemblies.
  2.  
  3. Remove the throttle body assembly from the vehicle.
  4.  
  5. Remove the two Torx® head retaining screws holding the TPS assembly to the throttle body.
  6.  
  7. Remove the throttle position sensor from the throttle shaft lever.
  8.  
  9. Installation is the reverse of removal.
  10.  

 
label.common.footer.alt.autozoneLogo