Jeep Wagoneer/Commando/Cherokee 1957-1983 Repair Information

Linkage

Print

REMOVAL & INSTALLATION



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the wiper motor and linkage used on the Wagoneer, Cherokee and J-series truck

  1. Remove the wiper arms and pivot shaft nuts, washers, escutcheons and gaskets.
  2.  
  3. Disconnect the drive arm from the motor crank.
  4.  
  5. Remove individual links where necessary, to remove the pivot shaft bodies without excessive interference.
  6.  
  7. Install in the reverse order of removal.
  8.  

 
label.common.footer.alt.autozoneLogo