Jeep Wagoneer/Commando/Cherokee 1984-1998

Brake Light Switch

Print

Removal & Installation



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Brake light switch is located on top of brake pedal lever under the dashboard

The brake light switch is mounted in the pedal support bracket and is operated by the pedal.

  1. Remove the steering column cover and lower the trim panel, if necessary.
  2.  
  3. Disengage the switch electrical connection.
  4.  
  5. Screw the switch out of the retainer, or rock the switch up and down, then pull it rearward out of the retainer.
  6.  
  7. Installation is the reverse of removal.
  8.  

 
label.common.footer.alt.autozoneLogo