Jeep Wagoneer/Commando/Cherokee 1984-1998

General Information


See Figures 1 and 2

The Cruise Command system is electrically actuated and vacuum operated. The turn signal lever on the steering column incorporates a slide switch which has three positions OFF, ON or RESUME. A SET button is located in the end of the lever. This device is designed to operate at speeds above approximately 35 mph (56 km/h).

The speed control module automatically controls throttle position to maintain a speed set by the operator. The vehicle will keep the set speed unless the driver presses the brake, clutch or accelerator pedal.

Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the cruise control switch and related components

Click image to see an enlarged view

Fig. Fig. 2: Common vehicle speed sensor location