Jeep Wagoneer/Commando/Cherokee 1984-1998

Clutch Master Cylinder

Print

FLUID RECOMMENDATIONS



The only fluid recommended for Jeep vehicles with a clutch master cylinder is a fluid meeting DOT 3 specifications.

FLUID LEVEL CHECK



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Clutch master cylinder fluid level

The clutch master cylinder reservoir is located under the hood, on the left side of the firewall.

  1. Before removing the clutch master cylinder reservoir cap, make sure the vehicle is resting on level ground and clean all dirt away from the top of the master cylinder.
  2.  
  3. Remove the reservoir cap. The fluid level should be within 1 / 4 in. (6mm) of the top of the reservoir or to the top indicator line (MAX) on the reservoir. Do not allow the fluid level to go below the MIN line.
  4.  
  5. Use new brake fluid only when adding fluid to the reservoir.
  6.  
  7. Add the fluid and bring it to the proper level.
  8.  


WARNING
Do not allow brake fluid to come in contact with painted components on the vehicle. If left on any painted surface, it will dissolve the paint.

 
label.common.footer.alt.autozoneLogo