Jeep Wagoneer/Commando/Cherokee 1984-1998

Blower Motor

Print

Removal & Installation



Except 4.0L Engines

See Figure 1

  1. Disengage the electrical connection.
  2.  
  3. Remove the blower motor attaching screws.
  4.  
  5. Remove the blower motor.
  6.  
  7. Remove the blower motor fan from the motor shaft for access to the motor attaching nuts.
  8.  

To install:
  1. Install the blower motor fan on the motor shaft.
  2.  
  3. Install the blower motor and fasten the attaching screws.
  4.  
  5. Engage the electrical connection.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Blower motor mounting screw locations

4.0L Engine

See Figures 2 and 3

  1. Remove the coolant overflow bottle retaining strap. Remove the coolant overflow bottle and bracket.
  2.  
  3. Disengage the blower motor wiring.
  4.  
  5. Remove the blower motor mounting fasteners.
  6.  
  7. Remove the blower motor.
  8.  
  9. Remove the blower motor fan from the motor shaft for access to the motor attaching nuts.
  10.  

To install:
  1. Install the blower motor fan on the motor shaft.
  2.  
  3. Install the blower motor and tighten the mounting fasteners.
  4.  
  5. Engage the electrical connection.
  6.  
  7. Install the coolant overflow bracket, bottle and retaining strap.
  8.  



Click image to see an enlarged view

Fig. Fig. 2: Loosen and remove the blower motor retaining bolts



Click image to see an enlarged view

Fig. Fig. 3: Removing the blower motor from the vehicle

 
label.common.footer.alt.autozoneLogo