Jeep Wagoneer/Commando/Cherokee 1984-1998

Headlight Switch

Print

Removal & Installation



See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: View of the headlight switch

This procedure applies only to models equipped with an instrument panel-mounted headlight switch.

  1. Disconnect the battery ground cable.
  2.  
  3. Pull the switch to the full ON position.
  4.  
  5. Reach up under the panel and depress the switch shaft retainer button while pulling the switch control shaft straight out.
  6.  
  7. Remove the switch ferrule nut from the switch.
  8.  
  9. Disconnect the switch from the harness.
  10.  
  11. Installation is the reverse of removal.
  12.  



Click image to see an enlarged view

Fig. Fig. 2: Reach up under the panel and depress the switch shaft retainer button while pulling the switch control shaft straight out

 
label.common.footer.alt.autozoneLogo