Jeep Wagoneer/Commando/Cherokee 1984-1998

Rear Window Wiper Switch

Print

Removal & Installation



See Figures 1, 2, 3, 4, 5 and 6



Click image to see an enlarged view

Fig. Fig. 1: After moving the cigar lighter housing out of the way, remove the rear wiper motor switch mounting screw ...



Click image to see an enlarged view

Fig. Fig. 2: ... then pull the motor switch assembly out of the way



Click image to see an enlarged view

Fig. Fig. 3: After pulling the switch assembly away from the dashboard, rotate the bulb socket and pull out of the housing



Click image to see an enlarged view

Fig. Fig. 4: Disengage the electrical connector from behind the rear wiper motor switch



Click image to see an enlarged view

Fig. Fig. 5: Remove the rear wiper motor switch from the housing panel by pushing in the clip using a small flat bladed tool ...



Click image to see an enlarged view

Fig. Fig. 6: ... then pull the rear wiper motor switch out of the bezel

  1. Remove the instrument cluster bezel.
  2.  
  3. If necessary, remove the cigar lighter housing panel.
  4.  
  5. Remove the switch housing panel.
  6.  
  7. Unplug the switch connector.
  8.  
  9. Remove the bulb socket from the housing panel, if equipped.
  10.  
  11. The switch can be removed from the housing panel by unsnapping it from behind using a small, flat bladed tool.
  12.  
  13. Installation is the reverse of removal.
  14.  

 
label.common.footer.alt.autozoneLogo