Jeep Wagoneer/Commando/Cherokee 1984-1998

Power Seat Motor

Print

Removal & Installation



See Figure 1

  1. Disconnect the battery ground.
  2.  
  3. Remove the bolts holding the seat assembly to the floor pan.
  4.  
  5. Tilt the seat and disconnect the wiring harness.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Power seat track assembly

  1. Remove the seat assembly.
  2.  
  3. Invert the seat on a clean surface.
  4.  
  5. Remove the attaching bolts and lift out the seat motor. Disconnect the wiring and cables.
  6.  
  7. Installation is the reverse of removal.
  8.  

If the seat transmission fails, it is not replaceable. The entire seat adjuster assembly will have to be replaced.

 
label.common.footer.alt.autozoneLogo