Jeep Wagoneer/Commando/Cherokee 1984-1998

Backup Light Switch

Print

Removal & Installation



The backup light switch on most transmissions is located on the right side of the case.

  1. Unplug the electrical connector and unscrew the switch.
  2.  
  3. If the switch uses a gasket (washer), replace it when installing the new switch.
  4.  
  5. If a gasket (washer) is not used, coat the threads of the switch with sealer before installation.
  6.  
  7. Tighten the switch to 27 ft. lbs. (37 Nm) and engage the electrical connector.
  8.  

 
label.common.footer.alt.autozoneLogo