Jeep Wagoneer/Commando/Cherokee 1984-1998

Starter Solenoid

Print

Removal & Installation



Remotely Mounted
  1. Disconnect negative battery cable.
  2.  
  3. Label and remove all wires from the solenoid. Remove the solenoid mounting screws.
  4.  
  5. Installation is the reverse of removal. Assure mounting surface is clean to provide a good ground.
  6.  

Starter Mounted

The starter solenoid is an integral component of the starter motor assembly and therefore, cannot be serviced separately. If the starter solenoid requires service, the entire starter motor assembly must be replaced.

 
label.common.footer.alt.autozoneLogo