Jeep Wagoneer/Commando/Cherokee 1984-1998

Windshield Washer Motor

Print

Removal & Installation



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Drain the washer fluid from the reservoir.
  4.  
  5. Disengage the wiring from the fluid level sensor, if equipped.
  6.  
  7. Remove the reservoir retaining fasteners and disengage the hoses from the reservoir.
  8.  
  9. Using a deep socket and an extension, remove the pump retaining fastener from inside the reservoir.
  10.  
  11. Remove the pump from the reservoir.
  12.  
  13. Installation is the reverse of removal.
  14.  



Click image to see an enlarged view

Fig. Fig. 1: Windshield washer reservoir and washer pump (motor) assembly

 
label.common.footer.alt.autozoneLogo