Jeep Wrangler/YJ 1987-1995 Repair Guide

Antenna

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Antenna removal and installation

  1. Remove the radio as outlined in Chassis Electrical .
  2.  
  3. Remove the 3 screws holding the antenna base and pad to the body.
  4.  
  5. Pull the antenna and the cable out of the vehicle.
  6.  

To install:
  1. Make sure the antenna pad is placed over the cable and guide the cable under the instrument panel.
  2.  
  3. Install the antenna base and pad to the body and secure with the 3 screws.
  4.  
  5. Install the antenna into the radio and install the radio.
  6.  

 
label.common.footer.alt.autozoneLogo