Jeep Wrangler/YJ 1987-1995 Repair Guide

Speedometer

Print

REMOVAL & INSTALLATION



1987-91 Vehicles

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Speedometer mounting-1987-91 vehicles

  1. Remove the shroud attaching screws (usually 5).
  2.  
  3. Exert downward pressure on the top and upward pressure on the bottom (of the shroud) while pulling the shroud towards you. This will release the retaining tabs.
  4.  
  5. Remove the speedometer attaching screws (usually 2) and pull the speedometer towards you. Disconnect the cable.
  6.  
  7. Installation is the reverse of removal.
  8.  

1992-95 Vehicles

See Figure 2



Click image to see an enlarged view

Fig. Fig. 2: Instrument cluster lenses and bezels-1990-95

  1. Disconnect the battery ground.
  2.  
  3. Remove the instrumentation shroud as outlined in cluster removal.
  4.  
  5. Remove the cluster as outlined earlier.
  6.  
  7. Remove the 3 screws and the speedometer lens.
  8.  
  9. Gently pry up the clip to release the lens from the bezel.
  10.  
  11. Remove the screws (usually 3) from the rear of the housing and remove the speedometer.
  12.  
  13. Installation is the reverse of removal.
  14.  

 
label.common.footer.alt.autozoneLogo