Jeep Wrangler/YJ 1987-1995 Repair Guide

Seat and Shoulder Belts

Print

REMOVAL & INSTALLATION



Front

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Front seat belt installation

  1. Remove the cover, remove the shoulder belt buckle anchor bolt from the floor panel and remove the belt buckle.
  2.  
  3. Remove the cap, the shoulder belt upper bolt, washer and guide from the sport bar.
  4.  
  5. Remove the lower anchor bolt that attaches the belt to the floor panel and remove the belt.
  6.  

To install:
  1. Position the end of the shoulder belt at the floor panel and the retractor at the door sill.
  2.  
  3. Install the anchor bolts and tighten to 30 ft. lbs. (41 Nm).
  4.  
  5. Position the shoulder belt guide on the sport bar, tighten the anchor bolt to 30 ft. lbs. (41 Nm), and install the bolt cap.
  6.  
  7. Install the shoulder belt buckle at the floor panel, tighten the anchor bolt to 30 ft. lbs. (41 Nm), and install the bolt cover.
  8.  

Rear

See Figure 2



Click image to see an enlarged view

Fig. Fig. 2: Rear shoulder belts

  1. Remove the cover, remove the shoulder belt buckle anchor bolt from the floor panel and remove the belt buckle.
  2.  
  3. Remove the cap, the shoulder belt upper bolt, washer and support/guide from the sport bar.
  4.  
  5. Remove the retractor anchor bolt from the quarter panel.
  6.  
  7. Remove the lower anchor bolt that attaches the belt to the floor panel and remove the belt.
  8.  

To install:
  1. Position the lower end of the shoulder belt at the floor panel and the retractor at the quarter panel.
  2.  
  3. Install the anchor bolts and tighten to 30 ft. lbs. (41 Nm).
  4.  
  5. Position the shoulder belt support/guide on the sport bar, tighten the anchor bolt to 30 ft. lbs. (41 Nm), and install the bolt cap.
  6.  
  7. Install the shoulder belt buckle at the floor panel, tighten the anchor bolt to 30 ft. lbs. (41 Nm), and install the bolt cover.
  8.  

 
label.common.footer.alt.autozoneLogo