Jeep Wrangler/YJ 1987-1995 Repair Guide

Manifold Absolute Pressure (MAP) Sensor

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: MAP sensor replacement

  1. Unplug the MAP sensor electrical connector.
  2.  
  3. Disconnect the MAP sensor vacuum supply hose.
  4.  
  5. Unfasten the MAP sensor mounting nuts, then remove the MAP sensor.
  6.  
  7. Installation is the reverse of removal.
  8.  

 
label.common.footer.alt.autozoneLogo