Jeep Wrangler/YJ 1987-1995 Repair Guide

Fuel Body Assembly

Print

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Fuel body replacement

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Tag and disconnect all electrical harnesses at the throttle body.
  4.  
  5. Remove the throttle body assembly from the vehicle as outlined earlier.
  6.  
  7. Remove the Torx® head screws that retain the fuel body to the throttle body. Remove and discard the gasket.
  8.  
  9. Installation is the reverse of removal. Be sure to use a new gasket.
  10.  

 
label.common.footer.alt.autozoneLogo