Jeep Wrangler/YJ 1987-1995 Repair Guide

Fuel Pressure Regulator

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Fuel pressure regulator replacement

  1. Remove the throttle body assembly from the vehicle.
  2.  
  3. Remove the three retaining screws that hold the pressure regulator to the fuel body.
  4.  
  5. Remove the pressure regulator assembly. Note the location of the components for reassembly. Discard the gasket.
  6.  
  7. Installation is the reverse of the removal procedure. Be sure to use a new gasket.
  8.  

 
label.common.footer.alt.autozoneLogo