Jeep Wrangler/YJ 1987-1995 Repair Guide

Flat Towing

Print

FLATBED



The approach ramp angle should not exceed 15 degrees.

ON-GROUND



If your Jeep must be towed with all four wheels on the ground, follow these guidelines:

  1. Mark the driveshafts and yoke flanges for alignment upon assembly.
  2.  
  3. Disconnect and secure (or remove) the driveshafts. Install a protective covering over the U-joints to keep them assembled and protected.
  4.  
  5. Cover the open ends of the transmission extension housing and the transfer case.
  6.  

 
label.common.footer.alt.autozoneLogo