Jeep Wrangler/YJ 1987-1995 Repair Guide

Wiper Blades and Arms

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3



Click image to see an enlarged view

Fig. Fig. 1: Rotate the wiper blade release clockwise to remove the wiper blade from the arm



Click image to see an enlarged view

Fig. Fig. 2: Carefully pry up on the the wiper arm to remove it from the shaft



Click image to see an enlarged view

Fig. Fig. 3: Wiper arm positioning

  1. Pull the blade away from the windshield.
  2.  
  3. Rotate the wiper blade release clockwise to release the wiper blade from the pivot pin.
  4.  
  5. To install the blade, just snap it into position.
  6.  
  7. To remove the arm, carefully pry it straight off. When you reinstall it, make sure that it doesn't hit the rubber molding at either edge of the windshield while running.
  8.  

 
label.common.footer.alt.autozoneLogo