Kia Amanti 2004-06

Hydraulic Control Module

Print

Removal & Installation





Click image to see an enlarged view

Fig. Hydraulic and electronic control module components

  1. Remove Hydraulic and Electronic Control Unit (HECU) connector.
  2.  
  3. Remove brake tubes from HECU.
  4.  
  5. Remove HECU after loosening HECU bolt.
  6.  
  7. Remove HECU bracket if necessary.

    Click image to see an enlarged view

    Fig. HECU bolt and bracket

  8.  

To install:

  1. Tighten HECU bracket bolt to specification: 150-216 inch lbs. (17-25 Nm).
  2.  
  3. Install HECU bolt and tighten to specification: 67-83 inch lbs. (8-10 Nm).
  4.  
  5. Install brake tubes for ABS and TCS. Tighten to specification: 108-144 inch lbs. (13-17 Nm).
  6.  
  7. Install brake tubes for ESP. Tighten to specification: 168-204 inch lbs. (19-23 Nm).
  8.  
  9. Connect HECU connector to HECU.
  10.  
  11. If necessary, bleed the air and test drive.
  12.  

 
label.common.footer.alt.autozoneLogo