Kia Amanti 2004-06

Removal & Installation

Print


NOTE
Before servicing, or working around, the SRS system, turn the ignition switch OFF , disconnect the battery and wait at least three minutes.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the glove box assembly and necessary crash pad components.

    Click image to see an enlarged view

    Fig. Crash pad components

  4.  
  5. Disconnect the blower motor electrical connector.
  6.  
  7. Remove the blower retaining screws.
  8.  
  9. Remove the blower motor from its mounting.
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  

 
label.common.footer.alt.autozoneLogo