Kia Amanti 2004-06

Ignition Coils

Print

Removal & Installation



  1. Remove spark plug wires from ignition coil pack.
  2.  
  3. Remove small bolts holding ignition coil in place.
  4.  
  5. Remove ignition coil.
  6.  

To install:

  1. Replace ignition coil and tighten to 80 inch lbs. (9 Nm).
  2.  
  3. Replace spark plug wires.
  4.  

Testing



Measure the resistance of the ignition coil. The primary ignition coil resistance is approximately 0.78 ohms.

Click image to see an enlarged view

Fig. Location of ignition coil packs

Measure the secondary coil resistance between the coil high voltage terminals. Secondary resistance should be 13.0 kohms, plus or minus 20 percent.

Click image to see an enlarged view

Fig. Measuring secondary coil resistance between high voltage terminals

 
label.common.footer.alt.autozoneLogo