Kia Amanti 2004-06

Upper Control Arms

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the front wheel.
  4.  
  5. Loosen the ball joint nut, but do not remove.
  6.  
  7. Using Special Tool 09568-34000 or equivalent, disconnect the upper arm ball joint from the knuckle.

    Click image to see an enlarged view

    Fig. Disconnecting the upper ball joint from the knuckle

  8.  
  9. Remove the two nuts on the wheelhouse panel and remove the upper control arm assembly.
  10.  
  11. Installation is the reverse of removal.
  12.  
  13. Tighten the wheelhouse panel nuts to 65-80 ft. lbs. (88-108 Nm).
  14.  

 
label.common.footer.alt.autozoneLogo