Kia Amanti 2004-06

Torque Specifications

Print

TORQUE SPECIFICATIONS
all readings in ft. lbs.
YearEngine ID/VINEngine Displacement LitersCylinder Head BoltsMain Bearing BoltsRod Bearing BoltsCrankshaft Damper BoltsFlywheel BoltsManifoldSpark PlugsOil Pan Drain Plug
                IntakeExhaust    
200443.576-8351-58-130-13753-5615-1729-3615-2225-33
1- Step 1: 25 ft. lbs.
TORQUE SPECIFICATIONS
all readings in ft. lbs.
YearEngine ID/VINEngine Displacement LitersCylinder Head BoltsMain Bearing BoltsRod Bearing BoltsCrankshaft Damper BoltsFlywheel BoltsManifoldSpark PlugsOil Pan Drain Plug
                IntakeExhaust    
200543.576-8351-58-130-13753-5615-1729-3615-2225-33
1- Step 1: 25 ft. lbs.
TORQUE SPECIFICATIONS
all readings in ft. lbs.
YearEngine ID/VINEngine Displacement LitersCylinder Head BoltsMain Bearing BoltsRod Bearing BoltsCrankshaft Damper BoltsFlywheel BoltsManifoldSpark PlugsOil Pan Drain Plug
                IntakeExhaust    
200643.576-8351-58-130-13753-5615-1729-3615-2225-33
1- Step 1: 25 ft. lbs.

Main Bearing Torque Sequence



  1. Install a grooved main bearing (upper bearing) on the cylinder block side.
  2.  
  3. Install a grooveless main bearing (lower bearing) on the main bearing cap side.

    Click image to see an enlarged view

    Fig. Upper and lower main bearings

  4.  
  5. Install the crankshaft. Apply engine oil to journal and pin.
  6.  
  7. Install the bearing caps with the arrow mark directed toward the front of the engine. Cap number must be correct.
  8.  
  9. Tighten the main bearing cap bolts to specification: 51-58 ft. lbs. (69-79 Nm).
    NOTE
    Cap bolts should be tightened evenly and sequentially in 4 to 5 increments before they are tightened to the specified torque.

  10.  
  11. Make certain that the crankshaft turns freely and check the end play of the crankshaft. Crankshaft end play specification: 0.0028-0.0098 inch (0.070-0.250mm). Wear limit specification: 0.014 inch (0.35mm).
  12.  

 
label.common.footer.alt.autozoneLogo