Kia Amanti 2004-06

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belt
     
    Water pump pulley
     
    Timing belt cover
     
    Drive belt auto tensioner
     
    Idler pulley
     
    Water pump mounting bolts
     
    Water pump
     

  6.  

To install:

  1. Clean the gasket surfaces of the water pump and cylinder block.
  2.  
  3. Install the water pump with a new gasket. Tighten the mounting bolts as shown in illustration.

    Click image to see an enlarged view

    Fig. Water pump bolt locations and torque specifications

  4.  
  5. Install or connect the following:

    Idler pulley
     
    Auto tensioner
     
    Timing belt cover
     
    Water pump pulley
     
    Accessory drive belt and adjust the auto tensioner
     
    Negative battery cable
     

  6.  
  7. Refill the cooling system to the correct level.
  8.  
  9. Start the engine and check for leaks.
  10.  

 
label.common.footer.alt.autozoneLogo