Kia_Sedona_2002-2006

Accessory Drive Belts

Print

Accessory Belt Routing





Click image to see an enlarged view

Fig. Accessory serpentine belt routing-3.5L engine



Click image to see an enlarged view

Fig. Accessory serpentine belt routing-3.5L engine



Click image to see an enlarged view

Fig. Accessory serpentine belt (A) routing-3.8L engine

Inspection



Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Rotate the auto tensioner clockwise to release tension, then remove the drive belt.
  4.  

To install:

  1. Install drive belt (A). Route the belt over the components in the following order: Crankshaft pulley - A/C pulley - idler pulley - generator pulley - water pump pulley - P/S pump pulley - tensioner pulley.
  2.  
  3. Rotate auto tensioner arm in the counter-clockwise moving auto tensioner pulley bolt with wrench.
  4.  
  5. After putting belt on auto tensioner pulley, release the auto tensioner pulley slowly.

    Click image to see an enlarged view

    Fig. Accessory serpentine belt routing-3.5L engine



    Click image to see an enlarged view

    Fig. Accessory serpentine belt (A) routing-3.8L engine

  6.  

 
label.common.footer.alt.autozoneLogo