Kia_Sedona_2002-2006

Side Mirrors

Print

Power Mirror



Removal & Installation

WARNING
Be careful not the scratch the door trim and other parts. Wear gloves to protect your hands.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the quadrant inner cover.

    Click image to see an enlarged view

    Fig. Remove the quadrant inner cover (A)

  4.  
  5. Loosen the mounting screw, remove the inside handle cover.

    Click image to see an enlarged view

    Fig. Loosen the mounting screw, then remove the inside handle cover (A)

  6.  
  7. Loosen the door trim (C) mounting screws. Release the clips that hold the door trim, then remove the door trim by pulling it upward. Disconnect the power window switch connector (A), power mirror connector (B), and door courtesy lamp connector (D).

    Click image to see an enlarged view

    Fig. Loosen the door trim (C) mounting screws. Release the clips that hold the door trim, then remove the door trim by pulling it upward. Disconnect the power window switch connector (A), power mirror connector (B), and door courtesy lamp connector (D)

  8.  
  9. After disconnecting the connector (A), remove the outside rear view mirror (B).

    Click image to see an enlarged view

    Fig. After disconnecting the connector (A), remove the outside rear view mirror (B)

  10.  
  11. Installation is the reverse of the removal procedure.
  12.  

 
label.common.footer.alt.autozoneLogo