Kia_Sedona_2002-2006

Fuel Pump

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2.  
  3. Record the radio anti theft code data.
  4.  
  5. Remove or disconnect the following:

    Rear seat
     
    Access cover
     
    Fuel pump electrical connector
     

  6.  
  7. Relieve the fuel system pressure.
  8.  
  9. Disconnect the negative battery cable.
  10.  
  11. Remove or disconnect the following:

    Fuel lines
     
    Fuel pump and filter assembly

    Click image to see an enlarged view

    Fig. Fuel pump and related components-3.8L Engine

     

  12.  

To install:

  1. Install or connect the following:

    Fuel pump and filter assembly
     
    Fuel lines
     
    Fuel pump electrical connector
     
    Access cover
     
    Rear seat
     

  2.  
  3. Start the engine and check for leaks.
  4.  
  5. Reprogram the radio anti theft codes.
  6.  

 
label.common.footer.alt.autozoneLogo