Kia_Sedona_2002-2006

Bleeding

Print


WARNING
When performing this procedure, do NOT start the vehicle-s engine until instructed to do so. This procedure will require the help of an assistant.

  1. Carefully raise the front end of the vehicle and support with safety stands.
  2.  
  3. Check the power steering pump fluid level.
  4.  
  5. Turn the ignition key to the ON position, to unlock the steering column, but do NOT start the engine.
  6.  
  7. Turn the steering wheel fully from left to right and back several times with the engine not running.
  8.  
  9. Recheck the fluid level, and add as necessary.
  10.  
  11. Repeat steps 4 and 5 until the fluid level stabilizes.
  12.  
  13. Start the engine and let it idle.
  14.  
  15. Turn the steering wheel fully from left to right and back several times.
  16.  
  17. Check to make sure the fluid is not foamy and that the fluid level has not dropped.
  18.  
  19. If necessary, add fluid and repeat steps 8 and 9.
  20.  

 
label.common.footer.alt.autozoneLogo