Windshield Wiper Motor
Removal & Installation
- Disconnect the negative battery cable.
Remove the nut, then remove the windshield wiper arm and blade.
Remove the 4 screws, then remove the weatherstrip and cowl top cover.
Remove the windshield wiper motor and linkage assembly after removing 4 bolts. Disconnect the wiper motor connector (A) and windshield de-icer connector (B) from the wiper motor & linkage assembly.
Installation is the reverse of the removal procedure. Tighten the retainers as follows:
- Wiper motor and linkage assembly bolts: 5-8 ft. lbs. (7-11 Nm)
- Wiper arm and blade bolts: 20-23 ft. lbs. (28-32 Nm).