Kia_Sephia_Rio_Spectra_Optima_1998-2006

Multi-Function Switch

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the steering wheel, as outlined earlier in this section.
  4.  
  5. Remove the steering column upper and lower shrouds.

    Click image to see an enlarged view

    Fig. Remove the steering column upper (A) and lower shrouds (B)

  6.  
  7. Detach the multi-function switch electrical connector(s).

    Click image to see an enlarged view

    Fig. Detach the multi-function switch (A) electrical connector(s)

  8.  
  9. Remove the 3 bolts, as shown, then remove the multi-function switch assembly (B).
  10.  
  11. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Remove the 3 bolts, as shown, then remove the multi-function switch assembly (B)

  12.  

 
label.common.footer.alt.autozoneLogo