Kia_Sephia_Rio_Spectra_Optima_1998-2006

Turn Signal (Combination) Switch

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the steering wheel, as outlined earlier in this section.
  4.  
  5. Remove the three lower steering column panel screws. Separate the upper and lower steering column panels.
  6.  
  7. Remove the bracket under the steering column, after loosening the 2 bolts.
  8.  
  9. Remove the 3 combination switch screws, then detach the connector and slide the switch off the steering column shaft.

    Click image to see an enlarged view

    Fig. Combination switch removal

  10.  
  11. Installation is the reverse of the removal procedure.
  12.  

 
label.common.footer.alt.autozoneLogo