Kia Sorento 2003-05

Front Crankshaft Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the accessory drive belts.
  6.  
  7. Remove the idler pulley.
  8.  
  9. Remove the crankshaft pulley.
  10.  
  11. Remove the power steering pump pulley.
  12.  
  13. Remove the belt tensioner pulley.
  14.  
  15. Remove the upper and lower timing belt covers.
  16.  
  17. Remove the timing belt.
  18.  
  19. Remove the timing belt crankshaft sprocket.
  20.  
  21. Remove the Crankshaft Position (CKP) sensor tone ring.
  22.  
  23. Remove the front crankshaft seal.
  24.  

To install:

  1. Install the front crankshaft seal. Use Seal Driver 09214-33000 or similar.
  2.  
  3. Install the CKP sensor tone ring.
  4.  
  5. Install the timing belt crankshaft sprocket.
  6.  
  7. Install the timing belt.
  8.  
  9. Install the upper and lower timing belt covers.
  10.  
  11. Install the belt tensioner pulley.
  12.  
  13. Install the power steering pump pulley.
  14.  
  15. Install the crankshaft pulley.
  16.  
  17. Install the idler pulley.
  18.  
  19. Install the accessory drive belts.
  20.  
  21. Connect the negative battery cable.
  22.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the accessory drive belts.
  6.  
  7. Remove the idler pulley.
  8.  
  9. Remove the crankshaft pulley.
  10.  
  11. Remove the power steering pump pulley.
  12.  
  13. Remove the belt tensioner pulley.
  14.  
  15. Remove the upper and lower timing belt covers.
  16.  
  17. Remove the timing belt.
  18.  
  19. Remove the timing belt crankshaft sprocket.
  20.  
  21. Remove the Crankshaft Position (CKP) sensor tone ring.
  22.  
  23. Remove the front crankshaft seal.
  24.  

To install:

  1. Install the front crankshaft seal. Use Seal Driver 09214-33000 or similar.
  2.  
  3. Install the CKP sensor tone ring.
  4.  
  5. Install the timing belt crankshaft sprocket.
  6.  
  7. Install the timing belt.
  8.  
  9. Install the upper and lower timing belt covers.
  10.  
  11. Install the belt tensioner pulley.
  12.  
  13. Install the power steering pump pulley.
  14.  
  15. Install the crankshaft pulley.
  16.  
  17. Install the idler pulley.
  18.  
  19. Install the accessory drive belts.
  20.  
  21. Connect the negative battery cable.
  22.  

 
label.common.footer.alt.autozoneLogo